REMOTE SPLIT REFRIGERANTS

Remote split refrigeration units are used when the configuration of the room does not allow the use of monobloc units or to avoid noise pollution and the release of heat.

Reference : MDB-BDBP

group_split_exterieur_mdb group_distance_interieur_split
  • group_split_exterieur_mdb
  • group_distance_interieur_split
  • refrigeration unit for mortuary
  • mortuary cell refrigeration unit
Temperature
Quantity

mailSend to a friend
REMOTE SPLIT REFRIGERANTS

REMOTE SPLIT REFRIGERANTS

Remote split refrigeration units are used when the configuration of the room does not allow the use of monobloc units or to avoid noise pollution and the release of heat.

 

This type of chiller consists of a condensing unit installed outside the cold room and an evaporating unit installed inside.

This technology makes it possible to avoid the release of heat in the conservation room and to deport noise pollution outside the building or the room.

The temperature and all the other parameters are regulated by an electronic regulator with digital display which will be fixed on the front of the cold room.

The power is calculated according to the volume and the function of the cold room.

Cell temperature:

- Positive temperature: 0 ° C / + 5 ° C

- Negative / positive temperature: -10 ° C / + 5 ° C

- Negative temperature: -15 ° C / -25 ° C

The refrigerant gases that we offer you comply with EU regulation N ° 517/214 or commonly called "F-GAS regulation".

Reference : MDB-BDBP